Table des Matières
Publicité
10
Troubleshooting
Problem
A remote control
which can no
longer be ac
cessed has been
assigned to the
mobile dust ex
tractor.
The mobile dust
extractor does
Possible causes
The mobile dust extractor
has had multiple owners or
users.
The connection parameters
on the remote control and
Remedy
Resetting the retrofit re
ceiver module
Activate automatic mode on
the mobile dust extractor
(see mobile dust extractor
operating instructions) and
then press and hold the
connection button [2-1] for
10 seconds until the flash
ing LED light goes out.
All devices saved in the ret
rofit receiver module are
deleted.
Resetting the remote con
trol
English
41
Publicité
Table des Matières
