Festool CT-F I/M-Set Notice D'utilisation page 31

6.1 Retrofit receiver module
WARNING
Risk of injury, electric shock
►Always disconnect the mains plug
from the socket before performing
any work on the machine.
►Only authorised electricians are al­
lowed to install the retrofit receiver
module.
►After installation, perform an elec­
trical safety test in compliance with
the applicable regulations.
Installation [4]
► Remove the hexagon socket
screws from the top and bottom of
the cover plate.
► Take the cover plate off the mo­
bile dust extractor.
► Plug in the retrofit receiver
module in compliance with the elec­
tronics on the mobile dust extractor.
► Tighten the hexagon socket
screws at the top and bottom on the
retrofit receiver module.
English
31