1.0
1.1
1.2
2.0
2.1
2.2
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
pilot-on-demand
5.0
5.1
5.2
6.0
6.1
6.2
6.3
6.4
7.0
8.0
9.0
10.0
11.0
Before reading this manual, be sure you know which model of appliance that you have. This information will have
been fi lled out by the installer on the following page and on the rating plate that is permanently attached to the ap-
pliance (see "rating plate information" section).
This manual is for the:
•
Ascent™ Deep Series (D42 and DX42 models)
If required, more detailed technical information is included in the appliance installation manual.
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel Ltd. reserves
the right to change or modify any information within this manual at any time without notice.
Visit the Napoleon website for the most current version of your appliance's manual.
Changes, other than editorial, are denoted by a vertical line in the margin.
This appliance is suitable for use with Napoleon's optional Universal Heat Management system. THIS MANUAL
DOES NOT include detailed information relating the optional sytem. Framing and fi nishing are NOT the same.
For further details, refer to UHM instructions provided with the kit before starting installation.
Batteries must be disposed of according to the local laws and regulations. Some batteries may be
recycled, and may be accepted for disposal at your local recycling center. Check with your
municipality for recycling instructions.
table of contents
W415-2913 / C / 09.21.20
EN
5
6
6
7
7
7
8
8
8
9
9
9
9
9
10
10
11
12
13
14
15
16
16
17
17
17
18
19
20
21
22
3