Camera Controls - dji ZENMUSE X4S Guide De Démarrage Rapide

2. Press the gimbal and camera release button on the Inspire 2 then rotate to remove the
Gimbal Cap.
3. Align the white dot on the gimbal to the red dot on Inspire 2 and insert the gimbal.
4. Rotate the Gimbal Lock to the locked position (red dots aligned).
1 2
Always ensure that the DJI Gimbal Connector 2.0 on the Inspire 2 is in the right
position when mounting, otherwise the camera will not mount.
Always power off the aircraft before removing the gimbal camera.

Camera Controls

Remote Controller
Press the Shutter Button to capture photos or the Record Button to record videos. Adjust
the camera's tilt using the left dial. Turn the right dial to adjust camera settings.
1
2
4
3
1. Left Dial
2. Record Button
3. Shutter Button
5
4 4. Intelligent Flight Pause Button
5. Right Dial
3
4