Install High-Back Booster - Chicco KidFit Guide D'utilisation

INSTALL HIGH-BACK BOOSTER

Place the Booster on the vehicle seat, push the Booster Backrest against the back of the vehicle seat.
1
Check that the head restraint of the vehicle seat does not interfere with the Headrest of the Booster.
2
If the vehicle head restraint pushes the Booster Headrest forward, raise or remove the vehicle head
restraint, if possible. If it is not possible to move the vehicle head restraint out of the way, use the
booster in the Backless mode. Ensure the child is the proper size to use the Backless Booster, refer
to page 13.
Always replace the vehicle head restraint when the Booster is removed.
3 If using the UAS, release the UAS Tightening Strap, press in the button located on the front of
the seat bottom and pull out both UAS Connectors.
Use of UAS with this Booster Seat is optional. If the UAS is not used, pull the UAS Tightening Strap snug
so that the UAS Connectors do not interfere with the seat belt.
4
Locate the UAS bars in your vehicle. Attach both UAS Connectors to the vehicle bars.
Pull on the UAS Tightening Strap and push back on the seat bottom to snug up the Booster
5
to the vehicle seat back.
24