Install Backless Booster - Chicco KidFit Guide D'utilisation

INSTALL BACKLESS BOOSTER

The Shoulder Belt Clip is stored under the Booster seat bottom. Remove the Shoulder Belt Clip
1
and Strap stored underneath seat.
2
Place the Booster Seat onto the vehicle seat.
If using UAS Connectors, release UAS Tightening Strap, press in the button located on the front
3
of the seat bottom (A) and pull out on both UAS Connectors (B).
Use of UAS with this Booster Seat is optional. If the UAS are not used, pull the UAS Tightening
Strap snug so that the UAS Connectors do not interfere with the seat belt. Skip to "Securing Child
in Booster" section page 34.
4 Locate the UAS bars in your vehicle. Attach both UAS Connectors to the vehicle UAS bars.
Pull on the UAS Tightening Strap and push back on the seat bottom to snug up the Booster
5
to the vehicle seat back.
32