Install Booster Seat - Chicco GoFit Plus Mode D'emploi

INSTALL BOOSTER SEAT

Use of UAS with this Booster Seat is optional. If the UAS Connectors are
not used, pull the UAS Tightening Strap snug so that the UAS Connectors do not
interfere with the seat belt.
3
If using UAS, pull the UAS Release Handle (a) and pull out both UAS
Connectors (b).
Locate the UAS lower anchor bars in your vehicle. Attach both UAS Connectors to the
4
vehicle lower anchor bars.
Pull on the UAS Tightening Strap and push back on the seat bottom to snug up the
5
Booster Seat to the vehicle seat back.
This booster seat UAS system is equipped with a unique release. Refer to page 36 for
further instructions on releasing the seat.
22