Installation; Installation Notes - Klarstein Hot Spot Crystal Flow Mode D'emploi

EN
24

INSTALLATION

Installation Notes

WARNING
Risk of injury! In order to avoid a hazard for very young children, this
heater should be installed so that the lowest heated rail is at least 600
mm above the floor..
• This heater must be installed by a qualified person, that is, a qualified electrician.
• Before installation and during installation, ensure that the heater is always discon-
nected from the power supply and is in a cool state.
Fixation of the heater on wall
1. Choose a wall where has enough space and is suitable to installing the appliance.
2. Use the enclosed template to mark the holes to be drilled on the wall. Then drill
4 holes ∅6 each into the wall.