After Use - Invacare Revato H335 Manuel D'utilisation

Installing the Aesthetic Cover (R7767) (Fig. 6)
1. If fitted, remove the end cap, position E, from the lower
support bar A.
2. Attach the plastic over B over the lower support bar.
If necessary, use a plastic mallet to insert the cover
completely.
3. Insert the screw and the nut C and tighten.
4. Attach a protective cap D on each side.
4.3 Using the support folding handle
WARNING!
Risk of falling or slipping!
– Before each use, check that the support folding
handle is securely fastened and sits firmly.
1. Grab the support folding handle with one hand and
carry out the desired body movement.
Raising the support bar
1. Lift the support folding handle from the horizontal
position to its maximum vertical position. It locks
automatically in this position.
Lowering the support bar
1. Lift the support folding handle approx. 10 mm to unlock
it and hold it as it drops down to the horizontal position.
5 Maintenance
5.1 General Maintenance Information
This product is maintenance-free, provided that the cleaning
and disinfection instructions are adhered to.
5.2 Cleaning and Disinfection
General Safety Information
CAUTION!
Risk of Contamination
– Take precautions for yourself and use
appropriate protective equipment.
IMPORTANT!
Wrong fluids or methods can harm or damage
the product.
– All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to
clean.
– Never use corrosive fluids (alkalines, acid etc.)
or abrasive cleaning agents. We recommend
an ordinary household cleaning agent such as
dishwashing liquid, if not specified otherwise in
the cleaning instructions.
– Never use a solvent (cellulose thinner, acetone
etc.) that changes the structure of the plastic
or dissolves the attached labels.
– Always make sure that the product is completely
dried before taking it into use again.
For cleaning and disinfection in clinical or long-term
care environments, follow your in-house procedures.
1572997-E
Cleaning Intervals
IMPORTANT!
Regular cleaning and disinfection enhances
smooth operation, increases the service life and
prevents contamination.
Clean and disinfect the product
– regularly while it is in use,
– before and after any service procedure,
– when it has been in contact with any body
fluids,
– before using it for a new user.
Cleaning
IMPORTANT!
– Clean by hand.
– Max. cleaning temperature 65 °C for 3 minutes.
1. Clean the product by wiping down all generally accessible
surfaces.
2. Dry the parts with a cloth.
Disinfection Instructions
Information on recommended disinfectants
and methods can be found on https://vah-
online.de/en/for-users.
In Domestic Care
Method: Follow the application notes for the used
disinfectant and wipe-disinfect all accessible surfaces.
Disinfectant: Ordinary household disinfectant.
Drying: Allow the product to air-dry.
In Clinical and Long Term Care
Follow your in-house disinfection procedures and only use
the disinfectants and methods specified therein.

6 After Use

6.1 Reconditioning
WARNING!
Risk of Falling
Worn fastening elements can suddenly come loose
and cause falling.
– Always use new wall plugs and bolts when
repositioning the product.
This product is suitable for reuse. To recondition the product
for a new user, carry out the following actions:
• Inspection
• Cleaning and disinfection
For detailed information, see 5 Maintenance, page 7 .
Make sure that the user manual is handed over with the
product.
Use new wall plugs and bolts when reconditioning the
product.
If any damage or malfunction is detected, do not reuse the
product.
6.2 Disposal
Be environmentally responsible and recycle this product
through your recycling facility at its end of life.
Disassemble the product and its components, so the different
materials can be separated and recycled individually.
7