Velleman CAMIP4 Notice D'emploi page 9

Note: 3GPP/ISMA is using RTSP protocol for 3G mobile phones to display the video stream from some network devices,
including IP cameras. This camera supports the RTSP protocol and video/audio codec needed by 3GPP/ISMA. Users
only need to access the address rtsp://ip_cam_address/CAM_ID.password on the 3G mobile phone to access the
video stream of the IP camera. No other extra configuration is needed on the IP camera. Different 3G mobile phone
may need different operation to be able to key in the rtsp address, please contact the 3G mobile phone customer
service for more details.
The video quality and resolution is the same value as set on the "video settings" page. Since the bandwidth provided
by the 3G service is fewer than 256k bps, it is advised to configure the "Internet speed" of the IP camera to 128k or
64k bps.
• When motion is detected, the IP-camera can send snapshots to an e-mail account or FTP server.
Use the Schedule – Email/ftp Alarm page to set up the e-mail account and/or FTP site.
• To configure a NAS (Network Attached Storage) system, go to the NAS Settings page.
• The Email/ftp and NAS schedule can be enabled via the Scheduling page.
• To change administrator settings, go to the Admin - Admin login page. Change the administrator
password regularly to increase security.
17/07/2009
CAMIP4
9
Rev. 02
© 2008 Velleman nv