Velleman CAMIP4 Notice D'emploi page 7

Caméra couleur ip real plug-and-play
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Model
IP CAM ID
Registration status
Network type
Video user
Video resolution
Video bandwidth
Email/ftp Alarm
NAS Record
Mac Address (Hex)
• Use the navigation items on the left of the screen to access the set-up pages.
• Select Video - Display to show live images of the camera within the browser window.
Note: this function requires an activeX component which will automatically be downloaded when
connected to the Internet. This may take some time to complete.
The size of the display can be set under Video Settings.
• Select Network to configure the network settings of the camera. Default setting is DHCP
(Dynamic Host Configuration Protocol), which will obtain an IP-address automatically. If DHCP is
not available, refer to your network administrator for correct settings.
• Select Advanced Network to configure the camera for PPPoE connection (ADSL service). Enter
PPPoE user name and password.
17/07/2009
CAMIP4
current firmware version
camera identification number
is camera registered with CamView software or not.
shows current network type
number of people that currently access the camera
current display resolution
current bandwidth setting
Email and ftp alarm warning enabled
NAS (Network Attached Storage) settings
Mac address of the camera
7
Rev. 02
© 2008 Velleman nv

Publicité

Table des Matières
loading

Table des Matières