Velleman CAMIP4 Notice D'emploi page 8

Note: both DHCP/manual IP setting and PPPoE can be selected together. However, PPPoE will have
priority and will be used when possible.
• Select Video Settings to configure the video set-up. On this page, it is also possible to retrieve or
set the password which is required to get access to the video images.
Note: the original password can be found on the ID/Password card that is provided with the camera.
For security and privacy reasons, make sure to change the camera password
• The camera can also be viewed over a 3G mobile telephone network. To set-up this connection,
select 3GPP/RTSP. Copy the Access URL line into the 3G phone to receive images from the IP
camera. However, the format in which to enter the URL may be different depending on the 3G
mobile phone type - refer to the user manual that came with the 3G phone for more information.
Note: the last part of the URL is composed of the cameras' ID followed by the video playback
password. This is unique for each camera.
17/07/2009
CAMIP4
8
Rev. 02
© 2008 Velleman nv