Display Control - Velleman CAMIP4 Notice D'emploi

• Change the 3GPP settings by selecting the 3GPP settings option.
• After adjusting the settings, click the Update button. The administrators' account and
password are required.
• To update the firmware, click on firmware upgrade (see §7.3 Web configuration – Upgrade
page)
• Clicking the Delete button will remove the camera from the camera list.

7.5 Display control

• Double-click on any video area to see that video full-screen size. Double-click again to return to
normal display.
• Double-click on a videos' information bar to go to single video display.
• The information bar contains following icons:
swap: only available in 6 and 13 windows display mode. The current
snapshot: take an instant copy of the displayed image
record: to record the current video
• Right-clicking on a video area will give following options:
17/07/2009
CAMIP4
video will be shown on the larger area.
black not recording
red recording
green motion recording
Full window: show current video in full window mode
Auto reconnect: reconnect video session automatically after changing
settings or loss of connection
Stop: end video display
Pause: temporarily halt video display
Motion recording: enable recording triggered by motion
Properties: show current settings for the camera (frame rate,
bandwidth, time)
13
Rev. 02
© 2008 Velleman nv