Noise/Vibration Information; Rechargeable Battery; Charging The Battery - Bosch GBH Professional 36 V-LI Plus Notice Originale

18 | English
Rotary hammer
Impact energy per stroke according to
EPTA-Procedure 05:2016
Rated speed
– Clockwise
– Anticlockwise
Tool holder
Spindle collar diameter
Max. drilling diameter:
– Concrete
– Masonry (with hollow core bit)
– Steel
– Wood
Weight according to EPTA-Proced-
B)
ure 01:2014
Permitted ambient temperature
– during charging
C)
– during operation and during stor-
age
Recommended rechargeable batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery GBA 36V 6.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Technical data determined using the battery that comes with the product.

Noise/Vibration Information

Noise emission values determined according
to EN IEC 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 90 dB(A); sound power
level 101 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN IEC 62841-2-6:
Hammer drilling into concrete: a
h
2
Chiselling: a =10.7 m/s , K=1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
1 609 92A 70H | (21.12.2021)
J
-1
min
-1
min
mm
mm
mm
mm
mm
kg
°C
°C
2 2
=11.1 m/s , K=1.5 m/s ,
2
,
GBH 36 V-LI Plus
3.2
0–940
0–930
SDS plus
50
28
82
13
30
4.0–4.5
0 to +45
–20 to +50
GBA 36V...
GAL 36..
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.

Rechargeable battery

Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.

Charging the battery

Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
GBH 36 VF-LI Plus
3.2
0–940
0–930
SDS plus
50
28
82
13
30
4.1–4.6
0 to +45
–20 to +50
GBA 36V...
GAL 36..
Bosch Power Tools