Slave Mode - JB Systems Invader Mode D'emploi

ENGLISH
o
Sou6 = White Leds
 Press the ENTER-button to confirm your choice.
 Put on some music and set the sensitivity of the microphone by using the sensitivity knob (7) so that the
effect reacts perfectly to the sound level of your music.
You can connect several units together: just put the first unit of the chain in one of the sound activated
effect modes and all other units in "Slave mode" (display shows "SLA") to make them all work in perfect
sync!
Note: When no music is detected, the output of the unit will be shut off (blackout).
2) FULL AUTOMATIC MODE:
The unit automatically runs a preprogrammed sequence. Select this mode when only 1 unit is used
(standalone) or when the unit is placed as the first (master) unit in a chain with several units.
 Press the FUNC-button until the display shows Aut (followed by a number from 0 to 6)
Please check carefully the Menu chart above.
 Use the UP or DOWN buttons to select one of the automatic modes:
o
Aut 0 = Laser + RGBWA + White Leds
o
Aut 1 = Laser + RGBWA
o
Aut 2 = Laser + White Leds
o
Aut 3 = RGBWA + White Leds
o
Aut 4 = RGBWA
o
Aut 5 = Laser
o
Aut 6 = White Leds
 Press the ENTER-button to confirm your choice.
 Now use the UP or DOWN buttons to select the speed:
o
S 1 = Fastest speed
o
S 100 = Slowest speed
o
S 0 = The default speed of the pre-programmed sequence
The unit automatically runs a preprogrammed sequence.
You can connect several units together: just put the first unit of the chain in one of the automatic effect
modes and all other units in "Slave mode" (display shows "SLA") to make them all work in perfect sync!

3) SLAVE MODE:

The unit follows the instructions given by the first unit (master) in the chain. Like this you can obtain nice
synchronized shows.
 Connect the DMX input of the unit to the DMX output of the previous unit in the chain.
 Press the FUNC-button until the display shows "SLA"
 Press the ENTER-button to confirm your choice.
You can connect several units together. Please put the first unit of the chain in "Music or automatic mode"
and all other units in "Slave mode" (display shows "SLA" to make them all work in perfect sync!
JB SYSTEMS® 6/54
USER MANUAL
INVADER