Slave Mode; Static Color Mode - JB Systems COB-PLANO Mode D'emploi

ENGLISH
HOW TO SETUP:
DMX512 Address Setting
Used to set the start address in a DMX setup.
 Press the MENU button until Axxx (A followed by 3 numbers) is shown on the display.
 Use the DOWN and UP buttons to change the DMX address.
 Once the correct address is shown on the display, press the ENTER button to confirm.
 The channel mode will now appear on the display (03CH – 04CH or 06CH)
 Use the DOWN and UP buttons if you would like to change the working mode
 Press the ENTER button to confirm
DMX
Channel Mode
The unit has 3 different DMX channel modes. With this function you can choose the DMX mode you
want to use. Refer to the DMX-charts to see the differences.
 Press the MENU button until A... (A followed by 3 numbers) is shown on the display.
 Use the DOWN and UP buttons if you want to change this DMX start address.
 Press the ENTER button to confirm.
 The channel mode will now appear on the display (03CH – 04CH or 06CH)
 Use the DOWN and UP buttons if you would like to change the working mode
 Press the ENTER button to confirm

SLAVE MODE

Used to set the unit in slave mode when you want to have synchronized effects with the master unit.
(when no controller is used and the first unit is running it's automatic programs or is set in a fixed
color)
 Press the MENU button until SLAVE is shown on the display.
 Press the ENTER button to confirm.

STATIC COLOR MODE:

Used to set a static color for the projector.
There are 2 ways to do this:
 Select one of the preprogrammed colors:
 Press the MENU button until P.. (P followed by 2 numbers) is shown on the display.
 Use DOWN and UP buttons to select one of the 7 fixed colors (01 to 07).
 (P08-P09-P10-P11-P00 are automatic chases)
 Press the ENTER button to confirm  now you can set the speed for the automatic chase (SP-0 to
SP-9 on the display). If you have selected a fixed color in the previous step (Pr01 –Pr07) then you
don't need to set a speed because this will have no influence at all.
 Press the ENTER button to confirm  now you can set the speed for the stroboscope function. (F on
the display)
 Use DOWN and UP buttons to change the flash rate (F- - 0 = slow, F- - 9 = fast).
 Set the 3 basic colors (red-green-blue) manually to compose precisely the exact color you need:
 Press the MENU button until r... (r followed by 3 numbers) is shown on the display
 Use DOWN and UP buttons to change the intensity of the Red color (r on the display).
 Press ENTER to confirm  now you can set the intensity of the next color
 Use DOWN and UP buttons to change the intensity of the Green color (G on the display).
 Press ENTER to confirm  now you can set the intensity of the next color
 Use DOWN and UP buttons to change the intensity of the Blue color (b on the display).
 Press ENTER to confirm  now you can set the speed for the stroboscobe function
 Use DOWN and UP buttons to change the flash rate (F on the display).
 When this is done, press the ENTER button to confirm.
AUTOMATIC SOUND MODE
Used to set the automatic Sound Mode so colors will change automatically to the sound of the
music.
 Press the MENU button until SU.. (SU followed by 2 numbers) is shown on the display.
JB SYSTEMS
®
5/51
USER MANUAL
COB PLANO