Technical Data; Electric Heated Deepfat Fryers Series Optima; Technical Characteristics; Installation Instructions - Diamond E77/F2V7A4-N Mode D'emploi

1.
1.1

ELECTRIC HEATED DEEPFAT FRYERS SERIES OPTIMA

MODEL
E77/F12-A4T
E77/F2V6-A4T
E77/F24-A7T
E77/F13-A4
E77/F2V7-A4
E77/F26-A7
*Feeding Power: 3N AC 400V ; 3 AC 230V ; IN AC 230V ; 50/60 HZ
N.B.: the absorbed power with 3N AC 380V ; 3 AC 220V ; 1N AC 220 V 50/60 HZ is around 9% lower than the values supplied.
The absorbed power with 3N AC 415V ; 3 AC 240V ; 1N AC 240V 50/60 HZ is around 9% higher than the values supplied.
1.2

TECHNICAL CHARACTERISTICS

STRUCTURE
Structural support made of stainless steel AISI 304, panel and base of stainless steel, mounted on height-adjustable feet.
TANK made of stainless steel AISI 304.
ELECTRICAL THERMOSTAT for resistor control (60•200°C) for an optimum temperature adjustment.
ELECTRICAL RESISTORS made of Incoloy.
CONTROL KNOBS in athermal material.
2.
Installation must be performed by qualified technicians according to the law in force.
WARNINGS:
Should the unit be installed against a wall, the latter must be heat-resistant to temperatures of 100°C and must be fireproof.
Before proceeding with the installation, remove the protective plastic film from the relevant parts, eliminating any adhesive
residues with an appropriate cleaning product suitable for stainless steel.
Install the unit in a horizontal position; its correct levelling will be achieved by rotating the adjustable feet.
If the unit is installed by itself, it is advisable to fasten it to make its stability safer.
2.1

DATA PLATE FOR ELECTRIC HEATED DEEPFAT FRYERS SERIES OPTIMA

The technical data plate is located as follows:
a)in the appliances with cabinet, on same
cabinet at low left and inside;
b)in appliances with no cabinet, at back and
inside.
DIMENSIONS mm.
EXTERNAL
L x P x A/A max.
400 x 700 x 290/425
400 x 700 x 290/425
700 x 700 x 290/425
400 x 700 x 850 x 985
400 x 700 x 850 x 985
700 x 700 x 850 x 985
V
TOTAL
POWER
ABSPORTION
TANK
Ltr.
12
6 + 6
12 + 12
13
7 + 7
13 + 13

INSTALLATION INSTRUCTIONS

Mod.
Matr. N°
KW
- 13 -

TECHNICAL DATA

NET
WEIGHT
kW
kg.
9
30
10,5
35
9 + 9
45
9
60
10,5 60
9 + 9 80
HZ
Tab. 1