Hazard Definitions - Powerfist 8000943 Fiche Technique Et Manuel D'utilisateur

8000943
Engine Timing Light
INTRODUCTION
The Engine Timing Light allows you to quickly determine and adjust an engine's
ignition timing. You can identify an incorrect hook-up with the timing readout of
0 to 60° BTDC (before top dead center). A Xenon bulb provides the ultra-bright
flash to see engine timing marks under bright lighting conditions, even during
normal daylight. A check light indicates when there is an incorrect hook up to
the external battery.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.

HAZARD DEFINITIONS

Please familiarize yourself with the hazard notices found in this manual. A notice
is an alert that there is a possibility of property damage, injury or death if certain
instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that will
result in severe personal injury or death if the proper precautions
are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that
could result in severe personal injury or death if the proper
precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that may result
in minor or moderate injury if proper practices are not taken.
2
Engine Timing Light
For technical questions call 1-800-665-8685
V4.0