Shortboost; Keep Warm; Autochef - Bosch NITP660SUC Manuel D'utilisation

Masquer les pouces Voir aussi pour NITP660SUC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Restrictions for using the SpeedBoost® function
¡ This function can only be used on one cooking zone of
the same cooktop segment at a time. The illustration
shows these segments of your cooktop.
¡ If the function is not available,
play of the selected cooking zone. The power level
set automatically.
Activating SpeedBoost®
Press
or
to select a cooking zone.
1.
Touch speed boost.
2.
lights up in the cooking zone display.
a
Deactivating SpeedBoost®
The function may be deactivated automatically to avoid
overheating. This serves to protect the internal electronic
components of the cooktop.
Press
or
to select a cooking zone.
1.
Press speed boost.
2.
goes out.
a
a The cooking zone switches to power level ⁠ .
Notes
¡ In certain circumstances, this function may switch off
automatically in order to protect the electronic elements
inside the cooktop.
¡ If you have set a power level before activating the func-
tion, this power level is used automatically after the
function has been deactivated.
6.10 ShortBoost
With this function you can heat cookware faster than with
power level ⁠ .
You can also use this function on the flexible cooking zone
if it is used as a joined cooking zone.
Recommendations for using this function:
¡ Always use cookware that has not been pre-heated.
¡ Use cookware with a flat base.
¡ Do not use cookware with a thin base.
¡ Never leave empty cookware, oil, butter or lard to heat
up unattended.
¡ Do not place a lid on the cookware.
¡ Place the cookware on the center of the cooking zone.
¡ Ensure that the diameter of the base of the cookware
matches the size of the cooking zone.
¡ Refer to the information on cooking with induction for in-
formation on the type, size and positioning of the cook-
ware. →  Page 8
Restrictions for using the ShortBoost function
¡ This function can only be used on one cooking zone of
the same cooktop segment at a time. The illustration
shows these segments of your cooktop.
and
blink on the dis-
is
¡ If the function is not available,
play of the selected cooking zone. The power level
set automatically.
Activating ShortBoost
WARNING
Oil and fat heat up quickly with the ShortBoost function.
Overheated oil and fat may ignite.
Never leave the cooktop unattended during cooking.
Press
or
to select a cooking zone.
1.
Press speed boost twice.
2.
a ⁠ . lights up on the cooking zone display.
Deactivating ShortBoost
The function is turned off automatically after 30 seconds.
You can turn it off manually before that.
Press
or
to select a cooking zone.
1.
Press speed boost.
2.
a ⁠ . goes out.
a The cooking zone switches to power level ⁠ .
6.11 Keep warm
This function is suitable for melting chocolate or butter and
for keeping food warm.
Activating the keep warm function
Select the cooking zone.
1.
Press keep warm.
2.
lights up on the cooking zone display.
a
Deactivating the keep warm function
Select the cooking zone.
1.
Press keep warm.
2.
goes out.
a
a The cooking zone turns off and the residual heat indica-
tor lights up.
6.12 AutoChef®
With the AutoChef® function, a sensor controls the tem-
perature of the pan. You can fry while the pan maintains
the selected temperature.
Advantages when using the AutoChef® function:
¡ The cooking zone only continues heating for as long as
this is necessary to maintain the temperature. This
saves energy and prevents the oil or fat from overheat-
ing.
¡ The frying function reports when the empty frying pan
has reached the optimum temperature for adding oil
and then for adding the food.
Operation en-us
and
blink on the dis-
is
15

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Nitp660uc

Table des Matières