Set-Up; To Make A Call To A Saved Telephone Number; Open The Front Door From The Inside - Telecom Behnke 10 Serie Mode D'emploi

1.2. Set-up

Remotely set up your new device via any
telephone with DTMF dialling.
▸
Call your Behnke Series 10 Intercom station
▸
The Behnke Series 10 Intercom station will
pick up the call and answer with a beep
▸ Press the * key within two seconds after the
beep (in case more than two seconds elapse
before the * key is pressed, set-up mode
may also be activated by pressing the * key
twice) [beep]
▸ Enter the security code
(default: 0 0 0 0) [beep] [beep]
▸
To enter a number for direct call button 1:
21 [beep] [beep] telephone number # [beep]
[beep][beep]
▸
To enter a number for direct call button 2:
22 [beep] [beep] telephone number # [beep]
[beep][beep]
▸
Exit set-up mode:
Press the * key or after 30 seconds of
inactivity [device will shut off]
For extensive information on device configu-
ration please cf. pp. 44.
www.behnke-online.com
Instructions for Series 10
Quick instructions
1.3. To make a call to a saved
telephone number
1 ▸ Press the corresponding direct call button,
2 ▸ Device will dial the saved number
3 ▸ Speak.
1.4. Open the front door from the
inside
During the conversation, the person called
may open the door from the inside by entering
0# on a telephone with DTMF dialling.
GB
35