System Functions - Onkyo DMI-40.4 Manuel D'instructions

E41_DMI-40.4_En_120711.book 24 ページ ２０１２年７月１１日 水曜日 午後５時４１分

System Functions

You can use the following systems by connecting the
DMI-40.4 and Onkyo amp or AV receiver equipped with
u jack by an u cable and an analog audio cable.
Depending on your iPod/iPhone/iPad model and
generation, some of the linked operations may not
be available.
■
System On
When you turn on your amp or AV receiver, the DS-A5
and iPod/iPhone/iPad turn on automatically.
In addition, when the DMI-40.4 and
iPod/iPhone/iPad are on, some of your amps or AV
receivers can be turned on by pressing the 8
button.
■
System Off
When you turn off your amp or AV receiver, the DMI-40.4
automatically go on standby.
24
■
Auto Power On
If you press the remote controller's r 3 button /
y, your
while your amp or AV receiver is on st andb
amp or AV receiver will turn on automatically, select
your iPod/iPhone/iPad as the input source, and your
iPod/iPhone/iPad will start playback.
■
Direct Change
If you start iPod/iPhone/iPad playback while listening
to another input source, your amp or AV receiver will
automatically switch to the input to which the DMI-
40.4 is connected.
Note
• If you use your iPod/iPhone/iPad with any other
accessories, iPod/iPhone/iPad playback detection
may not work.