Firmware Update - Onkyo DMI-40.4 Manuel D'instructions

E41_DMI-40.4_En_120711.book 26 ページ ２０１２年７月１１日 水曜日 午後５時４１分

Firmware Update

Follow the procedure below to update the firmware
of DMI-40.4.
Note
• Don't unplug the cables or turn the power off
during the update process.
• The program and accompanying online
documentation are furnished to you for use at your
own risk. Onkyo will not be liable and you will have
no remedy for damages for any claim of any kind
whatsoever concerning your use of the program or
the accompanying online documentation,
regardless of legal theory, and whether arising in
tort or contract. In no event will Onkyo be liable to
you or any third party for any special, indirect,
incidental, or consequential damages of any kind,
including, but not limited to, compensation,
reimbursement or damages on account of the loss
of present or prospective profits, loss of data, or for
any other reason whatsoever.
26
Access the firmware update menu of the WEB
1
settings (➔page 22).
Select either " Firmware Update from
2
Internet" or " Firmware Update from PC" .
Update the firmware according to screen
contents of your personal computer.
The DMI-40.4 goes into standby status once the
updating completes.
When you continue using the DS-A5, press the
3
8 button on the remote controller to restart it.
For further details, visit the Onkyo web site.
You can find the home page address on the back of
this manual.