Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tools needed for Installation (not included)
4
Installation scheme
5
IMPORTANT:
The injection of pH-Minus Liquid Domestic or pH-Plus Liquid must be the last component of the installation before
flowing into the pool. Make sure that the pressure in the circulation line does not exceed 1.0 bar!
We recommend using the convenient BAYROL Smart&Easy Connector with the additional flow monitoring.
Electrical installation scheme
6
IMPORTANT:
The electrical installation of the Automatic
be done by an electrician.
1. Residual Current Protective Device (RCD) ≤ 30 mA
2. Filter control respectively time switch
3. Power supply for dosing pumps
(voltage only when circulation pump is running)
Cutting the hoses
7
22
must
pH
90°
23.5 mm
Publicité
Table des Matières
