Master FORCE 450 N Manuel D'utilisation Et D'installation page 28

Any installation and repair works shall be carried out by competent qualified technical
personnel.
Keep any plastic bags, polystyrene, small metal items such as nails, staples, etc. out of the
reach of children because they might be dangerous.
This device is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible
for their safety.

Before connecting the device, check that the power supply used by you has the
characteristics indicated on the technical data label applied to the appliance.
This machine is intended solely and exclusively for the use for which it was designed and
the manufacturer cannot be held liable for damage due to improper use.

The actuator is intended for indoor installation. For special applications, please contact the
manufacturer in advance.
Do not wash the device with solvents or water jets.
Do not immerse the device in water.
Always request the use of original spare parts only. Failure to observe this rule may
compromise safety and void the device's warranty.
The device shall be installed according to the manufacturer's instructions. Failure to observe
these recommendations may compromise safety. The electrical power supply system shall
be installed in accordance with the standards in force.
In the event of a fault or malfunction, switch the device off from the main switch and request
the intervention of a qualified technician.
GENERAL SAFETY INDICATIONS
Page 3