When To Change The Dust Compartment Filter (Motor Protection); How To Change The Dust Compartment Filter; When To Replace The Exhaust Filter; How To Replace The Airclean Filter - Miele HS08 Mode D'emploi

en
When to change the dust
compartment filter (motor protection)
Replace this filter every time you start a
new packet of dustbags. A dust
compartment filter is supplied with
every packet of Miele dustbags.
How to change the dust
compartment filter (dia. 27)
^ Open the dust compartment lid.
^ Remove the dustbag.
^ Unclip the filter frame in the dust
compartment and remove the old
filter. Hold by the clean, unsoiled
section to remove it.
^ Replace with a new dust
compartment filter.
^ Close the filter frame.
^ Fit the dustbag into the holder as far
as it will go.
^ Close the dust compartment lid
securely, making sure it clicks into
position. Take care not to trap the
dustbag when doing so.

When to replace the exhaust filter

Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
2):
a AirClean
Replace this filter every time you start a
new packet of Miele dustbags. An
AirClean exhaust filter is supplied with
every packet of Miele dustbags.
42
b Active AirClean 30 (black)
c HEPA AirClean 30 (white)
Replace if the display for the exhaust
filter change indicator is completely
filled with red (dia. 7).
This occurs after approx. 50 hours of
operation which is equivalent to about a
year of average use. The vacuum
cleaner can still be used. However, the
suction power will be reduced as will
the effectiveness of the filter if it is not
replaced in good time.

How to replace the AirClean filter

(dia. 28, 29 + 30)
Do not use more than one exhaust
filter at a time.
^ Open the exhaust filter compartment
lid.
^ Remove the filter grille.
^ Open the filter grille and remove the
used AirClean filter by one of the
clean, unsoiled sections.
^ Replace it with a new AirClean filter.
If you wish to fit an Active AirClean
30 filter or a HEPA AirClean 30 filter
please see "Replacing one type of
exhaust filter with another".
^ Secure the catch on the filter grille
and replace it inside the exhaust filter
compartment.
^ Close the exhaust filter compartment
lid.