Replacing One Type Of Exhaust Filter With Another; Maintenance Indicator With Reset Button - Miele HS08 Mode D'emploi

How to replace an Active AirClean 30
filter or a HEPA AirClean 30 filter
Do not use more than one exhaust
filter at a time.
^ Open the exhaust filter compartment
lid.
^ Remove the exhaust filter (dia. 31).
^ Insert the new exhaust filter and
press the exhaust filter change
indicator ~ (dia. 5).
^ After approx. 10 - 15 seconds a thin
red stripe will appear in the left hand
side of the display (dia. 6).
If you wish to fit an AirClean filter,
see "Maintenance - Replacing one
type of exhaust filter with another".
^ Close the exhaust filter compartment
lid.
Replacing one type of exhaust filter
with another
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
2):
a AirClean
b Active AirClean 30 (black)
c HEPA AirClean 30 (white)
When changing the filter please note:
Do not use more than one exhaust
filter at a time.
1. If you wish to replace exhaust filter a
with filter b or c, it is essential that you
remove the filter grille before fitting the
new type of filter. You will also need to
press the exhaust filter change
indicator (dia. 5).
2. If you wish to replace exhaust filter b
or c with filter a, it is essential that you
also fit the filter grille * (dia. 29).
* Filter grille - see "Optional
accessories".
Maintenance indicator with reset
button [ (dia. 32)
(on vacuum cleaners with + / - buttons)
The indicator lights up after approx. 50
hours of operation, which is equivalent
to about a year of average use. The
level of soiling of the dust compartment
filter and the exhaust filter must be
checked at this point. The indicator will
need to be reset each time these items
are replaced.
The vacuum cleaner must be switched
on to do this.
^ Press the reset button [.
The maintenance indicator will go out
and reset to zero.
The indicator can only be reset by
pressing the reset button after the
light has come on. Pressing the
button at any other time will have no
effect.
en
43