Notes - Sovelor SFX Serie Notice Technique

1.14 FUELS THAT CAN BE USED
The Industrial warm air heaters can be fired by burners that use the following fuels:
• Natural gas G20.
• Butane G30.
• Propane G31.
• Gas oil max 1.5°E to 20°C.
The fuel that is used depends on the type of burner that is coupled with the heater.
1.15 UNPACKING THE HEATER
1. Remove the metal staples that hold the bottom part of the wooden case together. Use a screwdriver
for slotted screws to pull out the staples.
2. Take off the top part of the case, lifting it and setting it aside. Two people are needed for this
operation.
23