Remote Control - ProBreeze PB-AC06 Mode D'emploi

REMOTE CONTROL

The remote control can be used within five
metres from the front of the device. Make
sure that the remote control points to the LED
display when operating.
1. Power button
2. Oscillation button
3. Mode button
4. Increase button
5. Humidification button
6. Decrease button
7. Timer button
Note: Two AAA batteries included.
OPERATING INSTRUCTION
Power Button
Press once on the control panel or remote
control to turn the device on or off.
Oscillation Button
Press once on the control panel or remote
control to start or stop vent oscillation.
Mode Button
Press the Mode Button to switch between the
three modes available:
1. Fan Mode: In Fan Mode, the device will
produce a consistent wind speed. There
are four speed settings available. Press the
increase or decrease button to choose the
desired fan speed.
2. Natural Mode: Natural Mode is
designed to mimic wind by automatically
transitioning through the available speeds
to create a natural air flow. There are
two speed settings available. Press the
increase or decrease button to choose the
desired fan speed.
2
6
3. Night Mode: In Night Mode, the fan speed
will automatically reduce after 30 minutes
to lower energy consumption and noise.
There are two speed settings available.
In setting 1, the device will operate at fan
speed 2 for 30 minutes before reducing to
fan speed 1. In setting 2, the device will
operate at fan speed 3 for 30 minutes, fan
speed 2 for an additional 30 minutes, and
will then switch to fan speed 1.
1
3
4
5
English | 5