Use and Installation Manual
BAR 1000 / BAR 2000 / RST 1270 / RST 2270
Presentation of the equipment
Our range of toasters is made of 4 models (1 or 2 cooking levels). The
infrared quartz tubes provide an immediate cooking facility without a preheating
period (150 to 400 toasts/hour)
They are made with stainless steel fitted with an adjustable cooking.
Dimensions and capacity
BAR 1000
BAR 2000
Dim out
450x285x305
450x285x420
Power W
2000
Volts
V
110 or 230
110 or 230
Weight
10
Kg
Toasts/H
150
Heating elt.
4
Working
Our toasters are fitted with :
4 positions commutator
15 minutes timer
1 pilot light
cooking using infrared radiations needs no pre-heating.
You can put some water in the dip tray in order to make a mellow cooking.
Warning: for safety reasons, your products should always work with the dip
tray.
RST 1270
RST 2270
610x335x325
610x335x465
3000
3200
230
1PH + N + T
3PH + N + T
12
15
300
200
6
6
Cleaning
Before cleaning, turn your appliance off the mains and let it cool.
Do not allow the skin to come into contact with quartz tubes.
Clean the tubes with a cloth spacked with alcohol.
Do regularly clean the metallic walls of your appliance with a wet sponge and
some washing-up liquid.
Grills should not be washed with an abrasive sponge.
Do not wash your appliance under running water as filtering might damage it.
Installation
You must not put the lateral sides of your appliance close to a wall or a partition
made in a combustible material.
On the contrary, surfaces must be covered with a good thermo-insulating
material.
A 30 cm distance from the partition level is recommended.
4800
230
Electrical connection
17
BAR 1000/2000 should be connected in single phase.
400
Explanation for the wires colors :
9
Live
Brown
Neutral
Blue
Earth
Yellow-green
RST 1270/2270 should be connected in 230V 2PH 1N+T.
Explanation for the wires colors :
Live
Brown
Neutral
Blue
Earth
Yellow-green