Getting Started - Topcom Twintalker 1000 Manuel D'utilisateur

ENGLISH

4 GETTING STARTED

4.1 TURNING THE UNIT ON/OFF
To activate; turn the power On/Off button clockwise. After the click, the unit will "beep"
and the LCD Screen will display the current channel.
To switch off; turn the power button counter-clockwise until you feel a click.
The screen will turn blank.
4.2 ADJUSTING SPEAKER VOLUME.
Turn the power on-off button clockwise to increase the volume .
Turn the power on-off button counter-clockwise to decrease the volume.
4.3 RECEIVING A SIGNAL
The unit is continuously in RECEIVE mode when the unit is ON and not transmitting.
4.4 TRANSMITTING A SIGNAL
• Press and hold the TALK button to transmit. The transmission LED indicator will
light up
• Hold the unit in a vertical position with the microphone 5 cm from the mouth and
speak into the microphone.
• Release the TALK button when you have finished transmitting.
NOTE: Use the monitor function to check the channel activity (see 5.2)
IMPORTANT: In order for other people to receive your transmission, they must
also be on the same channel.
4.5 SENDING CALL TONES
You can use Call Tones to alert the other user to identify yourself. You can also use Call
Tones to signal the beginning or the end of a transmission.
• Press and release the call button, the red transmission LED indicator will lightup and
the call tone continues for 3 seconds.
• Your call tone will transmit to nearby receivers set to the same channel.
4 Topcom Twintalker 1000