Cleaning And Care - Klarstein SKYSCRAPER ICE Mode D'emploi

EN
24

CLEANING AND CARE

• Regular cleaning and maintenance is an essential step in maintaining the longevity
of your tower evaporative cooler and ensuring that it operates free of defects.
• Always unplug the evaporative cooler from the power supply before servicing or
cleaning.
• Use a soft cloth and a mild soap and warm water solution to clean the unit's
exterior. Do not use harsh cleaners, gasoline, paint thinner, benzene, etc., as these
substances can damage the evaporative cooler. Thoroughly dry all of the cooler's
parts with a soft cloth before reconnecting the unit to the power supply.
• If the evaporative cooler will not be in use for an extended period of time, place the
unit back in its original carton and keep it stored in a clean, dry place.
Cleaning the Dust Filter & Cooling Pad
• The evaporative cooler's filter and cooling pad will need to be removed prior to
cleaning. Once all of the different components have been cleaned, place them back
into the unit in this order: water tank, cooling pad and dust filter. To prevent clogging of
the dust filter, we recommend cleaning the filter at least once a month.
• To clean the dust filter, remove it from the back of the unit by pushing down on the two
tabs located above the filter and pull it out. Gently scrub it with a soft brush and rinse
with water. Allow it to thoroughly air dry before placing it back in the unit. To clean
the cooling pad, first remove the dust filter to expose the pad. Remove the cooling
pad from the back of the evaporative cooler, rinse it with clean water and allow it to
thoroughly air dry before placing it back into the unit.