Cleaning And Care - Klarstein WHIRLWIND Mode D'emploi

CLEANING AND CARE

• Switch off and unplug from the power supply, then pull out the water tank
according to instruction to clean the product. When cleaning the water tank, first
drain the water inside then remove any dirt and dust and wipe dry.
• Using a soft, damp cloth, carefully clean the exterior surface of the product.
• Do not allow water or other liquids to run into the interior of the product, as this
could create a fire and/or electrical hazard.
• We also recommend the periodic cleaning of this appliance by lightly running a
vacuum cleaner nozzle over the guards to remove any dust or dirt that may have
accumulated inside or on the unit.
• Do not use harsh detergents, chemical cleaners or solvents as they may damage the
surface finish of the plastic components.
Filter Cleaning
The filter is supplied assembled and can be removed for cleaning as required. It is
recommended that the filter be cleaned once every week.
1. Take off the dust filter, turn the water filter lock.
2. Clean the dust filter with abstergent or soft brush.
3. Dip the water filter into detergent water and dry it.
EN
19