EN
24
CLEANING AND CARE
•
Do not clean the device with water.
•
Do not use abrasive cleaners for cleaning.
•
Do not clean the device with solvents as these agents can cause deformation
or discolouration.
•
Do not use chemical cleaners for cleaning.
Replacing the UV lamp
When the UV symbol flashes, the UV lamp needs to be replaced
1
1
Remove the right cover and take out the HEPA filter.
2
Hold the UV lamp, turn it 90 ° and remove it.
3
Hold the new UV lamp securely and attach it to the holder. Then turn it 90 °.
4
Reinstall the HEPA filter and replace the cover.
2
3
4