Formular For Documentation Of The Setting Parameters; Parameterization - DOLD SAFEMASTER S UH 6932 Mode D'emploi

Formular for documentation of the setting parameters

Device:
Device No:
Configurated by:
Date:

1. Parameterization

1.1 Monitoring function
Overspeed
Underspeed
Inside range
Outside range
Esc
1.2 Limits
Frequency mode 1
upper limit
lower limit
Frequency mode 2
upper limit
lower limit
Frequency mode 3
upper limit
lower limit
Frequency mode 4
upper limit
lower limit
Esc
1.3 Hysteresis
Esc
1.4 Time Delay
Start-up delay
Reset delay
Alarm delay
Changeover bridging
Esc
1.5 Alarm memory
Alarm memory
automatic reset
Esc
1.6 Muting function
activate
deactivated
Esc
Esc
Please cut off and file it !
UH 6932
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
%
s
s
s
s
Parameterization
Parameterization using the display
To enter the device's parameterization mode the following key combination
is provided:
Press and keep pressed the right key at first. Then, press the left key (see
below). A display test follows and has to be acknowledged using the OK
OK
key (right key) when it was successful. Then, it is possible to change the
parameterization. Before the device adopts changed parameters, they must
be confirmed once more for safety reasons.
1)
2)
3)
actual frequency
100Hz
1)
ü
2.
OK
OK
1)
OK
OK
1)
OK
OK
only available at variant /_ _1.
1)
2) not available at monitoring function „underfrequency".
not available at monitoring function „overfrequency".
3)
49
1.
M11259_a
UH 6932 / 23.12.20 de / en / fr / 337A