CAPITAL SPORTS Flow M1 Mode D'emploi page 36

EN
4
There is an "L" sticker on the left pedal (43L) and an "R" sticker on the
right pedal (43R). Insert the pedal shaft (12) through the tube on the front
stabilizer (2). Slide the right pedal (43R) onto the right side of the pedal
shaft (12). Slide the left pedal (43L) to the left side of the pedal shaft (12).
Then secure the pedals (43R, 43L) at both ends of the pedal shaft (12) with
flat washers (82), spring washers (81) and screws (86).
Note: You will need two wrenches to tighten the nuts (86) on both ends of
the pedal shaft (12) at the same time.
36