SciCan STATIS ML Mode D'emploi page 19

3 Reprocessing methods
NOTE! Premature wear and malfunctions by improper maintenance and care!
Reduced life span of the product.
 Treat medical product with dental cleaning products before each sterilization cycle.
NOTE! Contact corrosion caused by moisture!
Damage to the medical product.
 Immediately remove the medical product from the steam sterilizer after the sterilization cycle.
The medical product can withstand a temperature of up to 138°C (280.4°F).
The medical product can be sterilized in steam sterilizers.
 Observe national and regional guidelines.
 Observe the instructions of the autoclave manufacturer.
Sterilization in a standards-compliant (e.g. EN 13060) steam sterilizer with validated B or S cycle.
Page 19 STATIS EN