Getting Started; Unpacking And Checking The Equipment Supplied; Steps For Initial Startup - Siemens Fujitsu AMILO L Serie Mode D'emploi

Getting started

Gettingstarted
Please observe the safety information in the "Important information", Page 3 chapter.

Unpacking and checking the equipment supplied

Keep the original packaging of the equipment in case you need to return it.
Packaging, Equipmentsupplied Packaging
► Remove all the equipment from the packaging.
► After removal from the packaging, check the equipment for evidence of damage in transport.
► Check that that the equipment matches the delivery note.
If you find damage in transport or a mismatch with the delivery note,
inform your sales office without delay!

Steps for initial startup

Initialstartup,overview Starting Up
Only a few steps are required to start up your machine for the first time:
• Select the position for your machine and place it there
• Connect the external devices
• Check the rated voltage and connect the machine to the mains
• Switch on the machine
You can find more details on the individual steps in the following sections.
External devices
If you wish to attach other external devices (such as a printer) to your machine,
complete the initial installation of your machine before connecting them. The steps for
connecting these external devices are described in the following sections.
Drives and modules
If you wish to fit other drives or modules to your machine, complete the initial installation
of your machine before fitting them. The steps for fitting drives and modules are
described in the "AMILO Desktop" manual in the chapter"System expansion" .
10600985329, edition 1
Getting started
English - 7