Switch On The Monitor And The Machine; Installation Of The Software - Siemens Fujitsu AMILO L Serie Mode D'emploi

Switch on the monitor and the machine

► Switch on the monitor (see operating instructions for the monitor).
1
► Switch the main switch at the back of the machine to position "I" (1).
► Press the on/off button on the front of the machine.
The operational display will light up and the machine will start.

Installation of the software

► During installation, follow the instructions on the screen.
Installation Software
► If anything is unclear regarding the data you are asked to input, read the
online Help in your operating system.
Further information on the system, its drivers, utilities and updates can be
found in the manual for reinstalling installed software and on the Internet
under "http://www.fujitsu-siemens.com/support".
10600985329, edition 1
Getting started
2
English - 11