USRobotics USR9110 Guide D'installation page 17

When you have connected to an existing
wireless network, click the Link Information
tab. You will see a picture with a computer
and a wireless device. If you see a graphic
representing signal waves between the
computer and the wireless device, you are
connected to the wireless network.
If you cannot connect to the Internet or to the correct Wireless Router, verify your
configuration settings and then refer to the Troubleshooting section in this Guide or in
the User Guide on the Installation CD-ROM.
Congratulations!
and the Wireless 54Mbps ADSL Router. You should now have shared Internet access
through the Wireless 54Mbps ADSL Router.
For troubleshooting and technical support information, refer to the Troubleshooting
section in this Guide or to the User Guide on the U.S. Robotics Installation CD-ROM.
Register your products
• At the Installation CD-ROM interface, click the Support link. Click Product
Registration and then click http://www.usr.com/productreg
• You can also launch a Web browser and type in
http://www.usr.com/productreg
You have finished installing the 802.11g 54Mbps USB Adapter
13