USRobotics USR9110 Guide D'installation page 11

To make a wireless connection:
Make sure each wireless adapter that will be connected to the network is set to
Infrastructure mode. If you purchased the USR5473 Wireless ADSL Starter Kit, refer to
the 802.11g 54Mbps USB Adapter installation instructions to determine how to change
this setting and for instructions on collecting your configuration information. If you are
connecting a different wireless adapter, refer to that wireless adapter's documentation.
When you are finished configuring the basic connection settings, you should now have
Internet access. Launch a Web browser and register your product at
www.usr.com/productreg If the page loads, you are finished with the installation
procedure. If the page does not load, refer to the Troubleshooting section.
7