Ezviz Mini Trooper Guide De Démarrage Rapide page 14

Connect Base Station to Internet via Wi-Fi
1. Note Serial Number and Verification Code
- Write down the serial number and verification code located on the
base station.
2. Connect to the base station Wi-Fi.
In your mobile device, look for the Wi-Fi Network named "ezviz_xxxxxx"
(xxxxxx stands for the six digit combination after "ezviz_")
- Once you choose the "ezviz_xxxxxx" network, enter the Wi-Fi
password which is the last four digits of the Serial Number + the
Verification Code, (listed on the device and package label)
If the wizard does not pop up, access the IP address (192.168.7.1) in
your Web browser.
3. Wireless Relay Gateway Setup (connecting the base station to
your local Wi-Fi network):
- In your mobile device press the "Start Button."
- Adjust antenna on the base station. Once that is complete, click
the "Antenna adjusted" button.
- Follow the prompt to create a login password for the base station.
- Choose your preferred Time Zone and select Daylight Savings
Time (DST) On or Off.
- Choose the "Wi-Fi Relay Internet Access"
option as your connection mode.
- Under Internet choose your local Wi-Fi connection and enter your
password. Press "Connect to Network."
- Under Wi-Fi Setting, connect to the ezviz_xxxxxx Base Station
Wi-Fi and enter the password.
- Press the "Save" button to save Wi-Fi settings.the LED indicator
on the Base Station will become from blue to steady green when
Internet is connected successfully.
- Proceed to Step 5 above through to Camera Installation.
9
(Optional)