Step 3
Plug in the Base Station
- Plug the Base Station into the power outlet and the LED
indicator will turn green, followed by light blue and then
solid blue. The device will turn on within 2 minutes. Once
the LED indicator on the Base Station is a solid blue,
proceed to the next step.
Step 4
Connect Base Station to Internet via Ethernet Cable
(for Connection via Wi-Fi, please see page 9)
- Connect the base station to your Wi-Fi router by inserting
the Ethernet cable into the bottom of the Base Station as
shown below.
- Proceed to the next step.
LED Indicator
Power Outlet
WPS/
POWER
WAN
LAN1
LAN2
LAN3
LAN4
RESET
Network Cable
5