Ezviz Mini Trooper Guide De Démarrage Rapide page 11

Step 5 Synchronize Base Station to Camera(s)
• Make sure the camera is within 2' to 3' (0.6 m to 1 m) of
the base station.
• The synchronization process takes about 2 minutes.
1. Tap the Main Button on the Base Station. The circular LED
indicator flashes Blue.
2. Press and hold the Sync button on the camera for 6
seconds. The LED indicator will slowly flash blue. When
flashing blue becomes more rapid and then stops, sync is
confirmed. Proceed to the next step.
*Note: If completed during the 2 Minute window, you can
sync up to 6 Mini Trooper cameras to each base station at
the same time.
SYNC Button
LED Indicator
6
Fast-Flashing Blue:
Synchronization complete.
Fast-Flashing Red: Sync
failed. Repeat the Sync
Process.