Worn-Out Products - Sundstrom SR 500 EX Notice D'utilisation

Ventilateur (respirateur)
Masquer les pouces Voir aussi pour SR 500 EX:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 67
The PPE Regulation (EU) 2016/425 type approval has
been issued by Notified Body 2849. For the address,
see the reverse side of the user instructions.
Type approvals in accordance with ATEX Directive have
been issued by Notified Body No. 0470.
Nemko AS, Phillip Pedersens vei 11, N-1366 Lysaker,
Norway.
Type approvals in accordance with IECEx scheme have
been issued by Notified Body No. 2460.
DNV GL Presafe AS, Veritasveien 3, N-1363 Hovik,
Norway.
The EU declaration of conformity is available at www.
srsafety.com
ATEX-codes:
SR 500 EX combined with hoods SR 520, SR 530,
SR 561, SR 562, SR 601, SR 602, face shield SR 570
or full face mask SR 200 with glass visor:
II 2 G Ex ib IIB T3 Gb
II 2 D Ex ib IIIC T195°C Db
Ta = -10°C to +40°C
SR 500 EX combined with face shield SR 540 EX,
helmet with visor SR 580 or full face mask SR 200
with PC visor:
II 2 G Ex ib IIA T3 Gb
II 2 D Ex ib IIIC T195°C Db
Ta = -10°C to +40°C
Key to ATEX markings
Explosion protection mark.
Equipment group (explosive atmospheres
II
other than mines with fire damp).
2 G
Equipment category (2 = High level of
protection for Zone 1, G = Gas).
2 D
Equipment category (2 = High level of
protection for Zone 21, D = Dust).
Ex
Explosion protected.
ib
Type of protection (Intrinsic safety).
Gas group (Propane).
IIA
IIB
Gas group (Ethylene).
IIIC
Dust material group (zone with conductive
dust).
T3
Temperature class, gas (maximum surface
temperature +200°C).
T195°C Temperature class, dust (maximum surface
temperature +195°C).
Equipment Protection Level, gas (high
Gb
protection).
Db
Equipment Protection Level, dust (high
protection).
Ta
Ambient temperature limits.
IECEx codes:
SR 500 EX combined with hoods SR 520, SR 530,
SR 561, SR 562, SR 601, SR 602, face shield SR 570
or full face mask SR 200 with glass visor:
Ex ib IIB T3 Gb
Ex ib IIIC T195°C Db
SR 500 EX combined with face shield SR 540 EX,
helmet with visor SR 580 or full face mask SR 200
with PC visor:
Ex ib IIA T3 Gb
Ex ib IIIC T195°C Db
Key to IECEx markings
Ex
Explosion protected.
Type of protection (Intrinsic safety).
ib
IIA
Gas group (Propane).
IIB
Gas group (Ethylene).
Dust material group (zone with conductive
IIIC
dust).
Temperature class, gas (maximum surface
T3
temperature +200°C).
T195°C Temperature class, dust (maximum surface
temperature +195°C).
Gb
Equipment Protection Level, gas (high
protection).
Equipment Protection Level, dust (high
Db
protection).
UKCA
UKCA Type-examination by UK Approved Body No
0194, INSPEC International Ltd, 56 Leslie Hough Way,
Salford, Greater Manchester, M6 6AJ, United Kingdom.
The UKCA declaration of conformity is available at
www.srsafety.com
Australian StandardsMark
The fan SR 500 EX is tested and certified to comply to
AS/NZS 1716:2012. The StandardsMark is issued
under licence by SAI Global Certification Services Pty
Limited Lic No.766 (ACN 108 716 669) ("SAI Global").

8. Worn-out products

Information on hazardous substances
The products do not contain any hazardous
substances.
Handling of worn-out products
The battery should be removed from the fan unit and
sor ted as battery waste. A worn-out battery can be
handed in to the retailer or to a recycling centre at no
cost. The fan unit is sorted as electrical waste. The
battery charger is sorted as electrical waste. Recycle
in accordance with local regulations. Proper recycling
of products contribu tes to efficient use of material
resources and reduces the risk of spread of
hazardous substances.
45

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

R06-2001

Table des Matières