Key To Symbols; Worn-Out Products - Sundstrom SR 500 Mode D'emploi

23. Belt SR 508
23. Rubber belt SR 504
24. Leather belt SR 503
25. Harness SR 552
26. Fan unit SR 500, bare
27. Gasket to fan unit
28. Pre-filter holder SR 512
29. Pre-filter SR 221
30. Particle filter P3 R, SR 510
31. Filter adapter SR 511
32. Pre-filter holder SR 5153
33. Particle filter P3 R, SR 710
34. Gas filter A2, SR 518
35. Gas filter ABE1, SR 515
36. Gas filter A1BE2K1, SR 597
37. Combined filter A1BE2K1-Hg-P3 R,
SR 599
38. Splash cover SR 514
39. Plug kit

6.Key to symbols

Recycling symbol
See user instructions
Not with ordinary waste
CE approved by
INSPEC Certification Services Ltd.
Insulation class 2
Pressure and temperature compensated

7. Worn-out products

The fan unit contains a circuit board with electronic
components, a small proportion of which comprise toxic
substances. The battery contains no mercury, cadmium
or lead, and is therefore not regarded as environmentally
harmful waste. The plastic parts are marked with the
material code. For proper handling, collection and recy-
cling, worn-out fans should be handed in to a recycling
centre. Contact the local authorities for information on
the location of your nearest recycling centre.
Recycle in accordance with local regulations. Proper re-
cycling of the product contributes to efficient use of the
natural resources.
40
8. Approvals
R06-0101
T06-0104
• The SR 500 in combination with face shield SR 540 or
T06-0103
SR 570, welding shield SR 590, helmet with visor SR
T06-0116
580, helmet with visor SR 580 with welding shield SR
R06-0110
584, hoods SR 520, SR 530, SR 561 or SR 562 is
R06-0107
approved in accordance with EN 12941, class TH3.
R06-0106
• The SR 500 in combination with full face mask SR
H02-0312
200 or half mask SR 900 is approved in accordance
H02-1312
with EN 12942, class TM3.
R06-0105
• The SR 500 conforms to the requirements of EN
R01-0604
H02-1512 61000-6-3 Emission and EN 61000-6-2 Immunity,
H02-7012 which makes the fan conform to EMC Directive
H02-7112
2004/108/EC..
H02-7212
• The electronics ingress protection is approved in IP
classification IP67 in accordance with IEC/EN 60529.
H02-7312
T06-0114
The EC type approval certificate has been issued by No-
R06-0703
tified Body No. 0194. For address, see back-cover.
Australian StandardsMark
The fan SR 500 is tested and certified to comply to
AS/NZS 1716:2012. The StandardsMark is issued
under licence by SAI Global Certification Services Pty
Limited Lic No.766 (ACN 108 716 669) ("SAI Global").