Publicité
Les langues disponibles
Les langues disponibles
EN: Instructions for use
Read the assembly and safety instructions carefully
1. Read and keep the instructions for use
This instruction manual belongs to this car seat cover. The installation and
safety instructions contain important information on commissioning and
handling.
Read the instructions for use, especially the safety information, carefully before using
the product. Failure to observe these assembly and safety instructions can lead to
serious injuries or damage.
Keep the instructions for use for future reference. If you pass the product on to third
parties, be sure to include these assembly and safety instructions.
2. Explanation of warning symbols and notes
The following symbols and signal words are used in these operating instructions.
Warning
This signal symbol / word indicates a hazard with a medium
level of risk which, if not avoided, can result in death or serious injury.
Note
This signal word warns of possible property damage.
Information This symbol gives you useful additional information on ins-
tallation and use.
Tip
This symbol gives you additional tips on installation and use.
3. Intended use
The seat covers are designed exclusively for covering standard vehicle seats (not for
sports seats). They are intended exclusively for private use and not suitable for com-
mercial use.
Use the seat covers only as described in these operating instructions. Any other use
is considered improper and can lead to property damage or even personal injury. The
seat covers are not a children's toy.
Only install the seat covers in vehicles that are named on the type list on the back of
the packaging or in the accompanying brochure. The manufacturer or dealer assumes
no liability for damage caused by improper or incorrect use.
4. Safety instructions
Warning
Risk of death!
Correct initial assembly or attachment of the seat cover to the vehicle is
essential to guarantee the safety of the user. If the seat airbag is not in-
stalled correctly, it cannot be guaranteed that the seat airbag will eject
properly in the event of an impact.
→ Attach the seat covers as described in these operating instructions.
→ When attaching the seat covers, make sure that they are correctly as-
signed (driver or front passenger seat cover). The side of the backrest co-
vers with the „airbag" patches on the side must rest on the backrest side
with the airbag label on your seat.
→ Under no circumstances may the cover openings be manipulated (no
covering, sewing or repairs yourself)
→ Reposition the seat covers if they are displaced or damaged. If this is
no longer possible due to advanced wear, the cover must be removed or
replaced.
→ On no account attach the seat covers if they are visibly damaged or
deformed.
→ Never manipulate, repair or sew the special side airbag seams on the
seat covers.
→ Headrest entries, backrest adjustment levers / wheels for backrest un-
locking or armrests must not be covered with the seat cover. Proper cu-
touts must be made. Please note the following assembly steps (point 5).
Warning
Suffocation hazard!
When children play with the seat covers, they can get caught in them or
pull them over their heads and suffocate.
→ Do not let children play with the seat covers.
Note
Risk of damage!
Improper handling of the seat covers can damage the seat covers.
→ Never place the seat covers on or near hot surfaces (e.g. stove tops).
→ Never expose the seat covers to high temperatures or the elements
(e.g. rain).
For removing and installing the headrests, please refer to the manufactu-
rer's information for your vehicle.
5. Mounting instructions
Check the contents of the package.
!
Mount the seat covers with Paul
1. This is Paul. He helps with good tips through the assembly instructions.
2. Paul's recommendation: Have useful aids such as scissors and credit card ready
before starting the installation.
3. Scan the QR code for more helpful tips and videos.
2
A
Mount the headrest covers
1. Remove the headrest. Read the operating instructions for your vehicle or ask your
car workshop.
2. Paul's TIP: In some vehicles, the headrests can be removed more easily with the
help of a credit card that is pushed between the seat and the plastic guide.
3. Cover the headrest cover.
4. Headrest covers for rear seat bench (3 x): Tighten the stoppers accordingly (flap is
in front).
5. Close the flap on the headrest cover with hook & loop fastener.
B C
Mount the front seat covers
1. Put on the backrest cover from top to bottom.
2. Make sure that the side airbag labels are correctly assigned (right / left seat)! The
side airbag label must be on the outside (door side) of the respective seat.
3. Pull the tab through between the seat and the backrest. Put on the seat cover
from front to back. Guide the rubber bands sideways past the seat.
4. Paul's tip: If you cannot pull the tab through between the seat and the backrest,
your seat may have a seat frame covering. The seat frame cladding can either be
opened for the tab, or the tab can be pushed through to the seat frame cladding.
5. Close the flap upwards with the hook & loop fastener of the backrest.
6. Close the rubber bands behind the seat.
7. If your seat is equipped with a side lever, open the side zippers accordingly so that
the side lever is freely accessible.
8. Paul's tip: If your seat is equipped with armrests, pull the cover down to the arm-
rest. The cover must sit well at the top. Cut the cover at the point of the armrest.
Make sure that the side airbag seam is not damaged! Raise the armrest and pull it
through the cut opening.
9. Open the zips on the upper side of the backrest cover so that the mounting
openings of the headrest are exposed.
10. Fit the head restraints on the front seats and check that the cover is correct and
tight.
D E
Mount the rear seat cover
1. Cover the rear seat bench from front to back. Possibly tilt the rear seat bench.
2. Attach hooks to rubber bands.
3.
Connect the hooks on the underside of the rear seat bench.
4. Position the cover exactly where the seat belts are and make a cut.
5. Pull the cover over the backrest. Belts must be freely accessible and must not be
covered by the cover!
6
Connect the hooks on the underside of the rear seat backrest.
7. Cut the cover at the point of the belt guide.
8. Slide the cover under the plastic of the belt guide.
9. Paul's tip: Thanks to the triple zipper division, the backrest cover is universally suitable
for rear seats. Depending on the width of the rear seat back, one or both of the midd-
le parts can be removed.
10. Paul's tip: When sharing the rear seat or using an armrest, open the variable zippers
with the slider as required.
11. Lay out the tape with many small slot openings on the upper side of the rear seat
backrest cover so that the assembly openings for the headrests are visible.
Paul's tip: If necessary, the slot openings can be connected with scissors if the assem-
bly openings for the headrests are not accessible through a slot opening.
12. Fit the headrests of the rear seat and check that the cover is correct and tight.
Paul's tip: Check the cover regularly for slipping and reposition it if necessary.
6. Cleaning
Pay attention to the textile care symbols on the sewn label.
7. Disposal
The seat covers can be disposed of with the residual waste.
Dispose of the packaging according to type. Dispose of cardboard and cardboard as
waste paper and foils in the recyclable material collection.
8. Service and Support
If you have any questions about the product, please contact office@walsergroup.com
Publicité
