Cleaning - Weston 36-0003-W Mode D'emploi

IMPORTANT NOTES BEFORE USE
A protective coating is applied to this unit prior to shipment. This coating
protects the unit in shipment and during its shelf life.
It is very important to thoroughly clean the unit before using it, especially
around the edges or areas that have been soldered or welded. Completely
disassemble and thoroughly clean all parts with hot water, dish detergent
and a soft cloth. Rinse with clean water and dry thoroughly. DO NOT use any
harsh or abrasive brushes, chemicals or detergents. Avoid using detergents or
cleansers containing high percentages of free alkali or acid.
DO NOT clean any parts of this unit in a dishwasher.
Coat all metal parts with a food-safe silicone spray after cleaning and before
storing.
Be certain to store the unit in the original box in a cool, dry location.
Run a small "Test Batch" through the unit before initial use.

CLEANING

• Before using the Sausage Stuffer for the first time, thoroughly wash all
parts of the unit that will come in contact with food. Wash with warm, soapy
water. Rinse with clear water. Dry immediately. THIS APPLIANCE IS NOT
DISHWASHER SAFE.
• After each use, thoroughly wash all parts in warm, soapy water. Rinse with
clear water. Dry immediately. THIS APPLIANCE IS NOT DISHWASHER
SAFE.
• When storing the Sausage Stuffer for extended periods of time and between
uses, it is recommended to coat all surfaces with food grade silicone spray.
This will protect and prolong the life of the Sausage Stuffer.
5