Publicité
Les langues disponibles
Les langues disponibles
6. Eco Button:
When the unit is in ECO mode, the
light will turn on. In ECO mode, the unit will
turn-off once the room is cooled to the user set
temperature. The unit will turn back on when the
room temperature rises above the user set
temperature.
Before the compressor stars, the fan motor will
run for a while, then it will stop for a while-and will
repeat to provide a much more comfortable-
feeling and save energy.
7. Sleep Button ::
Press the SLEEP button, the
Sleep Light will be on, and all the left lights will be
off after a while. In SLEEP mode, the air-
conditioner will automatically adjust the
temperature and fan speed to make the room
more comfortable during the night. For cooling
mode, the set temperature will automatically raise
every 30-60 minutes and at most change six times
until the set temperature is 81or 82°F. For heating
mode, the set temperature will automatically
decrease every 30-60 minutes and at most
change six times until the set temperature is 75 or
76°F. And every running time depends on the set
temperature.
8. Fan Speed Button:
to choose the fan speed options. You can choose
Hi, Med, Lo or auto speed in COOL or Heat mode
and choose Hi, Med, Lo in FAN mode.
9.
Filter Button:
When the fan motor has worked for
500 total hours, the Filter Check light will turn on to
remind the user to clean the filter. The light can
then be turned off by pressing the Filter Check
button.
Press the FAN SPEED button
10.
Directional Louvers:
horizontal wheel to control the horizontal direction,
and the air deflector to control the vertical
direction.
air deflector
14
To direct airflow, use the
horizontal wheel
air deflector
Publicité
Chapitres
