E N G L I S H
THE DETECTOR'S SPEAKER MAKES NO SOUND.
• Ensure that the detector is on.
• Press the volume button. It will toggle on and off.
• Ensure that the laser is turned on and that it is emitting a laser beam.
• If the detector is still not making any sound, take it to a D
service center.
THE DETECTOR DOES NOT RESPOND TO THE BEAM FROM ANOTHER LASER UNIT.
• The D
WALT Digital Laser Detector has been designed to work only
E
with the DW088 and the DW089 and certain other compatible line
lasers.
THE DETECTOR GIVES OFF A TONE BUT THE LCD DISPLAY WINDOW DOES NOT
FUNCTION.
• If the detector is very cold, allow it to warm up in a heated area.
• If the LCD display window is still not functioning, take the detector to a
D
WALT service center.
E
BRIGHT LIGHT SHINING ON DETECTOR CAUSES CONTINUOUS "ON-GRADE" SIGNAL.
• In the presence of very intense ambient light, the detector may give a
false or erratic indication of level.
• Reposition the detector out of the intense light or shade the sensor
window (25) to resume normal operation.
Optional Accessories
USING THE LASER WITH ACCESSORIES (FIG. 1 INSET)
The laser is equipped with a 1/4" x 20 female thread (11) on the bottom
of the unit. This thread is to accommodate current or future D
accessories. Only use D
WALT accessories specified for use with this
E
product. Follow the directions included with the accessory.
Consult your dealer for further information on the appropriate accessories.
These are:
64
WALT
E
WALT
E