Product Overview; Intended Use - Pattfield Ergo Tools PE-250NTS Traduction De La Notice Originale

1
2
3
4
5
6
7
8
9
1
3
1
136 EN
15
14
13
12
11
10
2 mm 2 mm
2
4
2

Product overview

1x
1 Wet grinding wheel
2 Wet grinder work rest
3 Water bath securing screws (3x)
4 Water bath
5 Drive spindle
6
Drain plug for water bath
7 RESET button
8 TEST button
9 Mounting holes (one at each corner)
10 ON/OFF switch 1x
11 Wheel guard securing bolts (3x)
12 Work rest
13 Wheel guard
14 Grinding wheel
15 Eye shield
BEFORE USE
1 Secure the grinder through the mount-
ing holes 9 to a bench with screws,
nuts or bolts (not included).
3 Mount the mounting bracket to the
DE grinding wheel guard 13. Lieferumfang
FR Etendue de livraison
IT Materiale compreso nella fornitura
NL Leveringsomvang
SV CONNECTING TO POWER SUPPLY Leveransomfång
1 Plug into socket and press „RESET"
CZ button 7, indicator switches on. Rozsah dodávky
SK Caution! Before connecting to the Rozsah dodávky
power supply, rotate the wheels by
hand to ensure that they run freely. RO Volumul livrat
GB Scope of delivery

Intended Use

1x
The tool is intended for wet and dry grinding.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
2 Attach the work rest 12. Adjust the
gap between work rest and grinding
wheel 14 to 2 mm.
4 Fit the eye shield 15 to the mounting
bracket as close as possible to the
grinding wheel 14 without coming
into contact with it.
TEST
2 Press „TEST" button 8, indicator turns
off. Press „RESET" button again.
Don't use the grinder if test fails.
EN 137